iphone camera specifications

Focal length: 3,85mm (equivalent to 37,0mm)

Aperture: f/2,8 (fixed)

Focus: infinity (manually adjustable to 2cm)

Sensitivity: Auto ISO

Shutter speed: 1/5s fixed (light sensitivity is only regulated by per-pixel-ISO)

Depth of field: 1,47m to infinity

Sensor size: 1/4"

Resolution: 1600x1200px

Dynamic range: 6,3 f-stops

Color space: sRGB, automatic white balance

Dimensions: 8mm x 8mm x 5mm

Read further for a full detailed explanation:

• We can exclude lenses for a 1/3" sensor, as the camera module is only 0.32" wide. That means, 1/4" CMOS or smaller was used.
  
• The CMOS manufacturer provides two models for 2MP, both 1/4" in size. The mt9d012d00stc
  differs from the mt9d014d00stc only in the frame speed. Because the
  iPhone "isn't made for video", I suppose the chip doesn't have an analog output - which leaves the variable-fps d012. The data sheet is under NDA, but the Flyer provides enough information.
• CMOS data: Resolution: 2MP (1600x1200)
• Pixel size: 2,2µm²
• Imaging area: 3,56mm x 2,68mm -> equals a crop factor of 9,62
• and a circle of confusion of 0,036mm after the lowpass-filter
• Color filter: Bayer pattern
• Dynamic
  range: 59,5dB -> equals a lighting control range of 10 f-stops ->
  important, because there is no mechanical aperture control
• Signal-to-Noise-Ratio: 37,7dB -> equals the dynamic range from photography world:
• 6,3 f-stops dynamic range -> that really is below average (a good DSLR can do 11)
• Flash support: Xenon / LED -> post-production flash mod, anyone?
• Rolling shutter -> 0.2 sec fixed shutter speed (see: the longest exposure time)
• If you compare the original camera module in the iphone with the manufacturer's site, you'll see that the NB970 fits all the specifications, but has a far too big lens.
• This impression is reverted after a short glimpse into the details section, where the front seems to be strikingly similar to all other camera modules.
• Here, EFL (3,85) stands for effective focal length and TTL (5,0) for total length (of the physical module).
• FNO means f-number, the (maximum/standard) aperture of 2,8.
• Additionally,
  the f/2,8 is confirmed by the camera EXIF data. I cannot confirm the
  characteristic cross shape at the front on the lens based on the photo
  at iFixit. But, presuming that all these data are describing the
  correct items, these are now the most accurate informations about the
  iPhone camera on the 'web.

Via